 |
|||
|
|
|||
|
Page Title:
AIR BRAKE HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0406 00
AIR BRAKE HARNESS REPLACEMENT (Contd)
REMOVAL
1.
Remove three tiedown straps (6) from air brake electrical harness (2) and main harness (7).
Discard tiedown straps (6).
NOTE
Prior to removal, tag all lead wires for installation.
2.
Disconnect two leads 75 (5) from pressure switch (4) on crossmember (3).
3.
Disconnect two leads 75 (11) from booster stoplight switch (12).
4.
Disconnect two leads 75 (10) from terminal plugs (9) on main harness (7).
5.
Remove air brake electrical harness (2) from frame rail (1) and crossmember (8).
INSTALLATION
1.
Install air brake electrical harness (2) on main harness (7) on frame rail (1) and crossmember (8)
with three new tiedown straps (6).
2.
Connect two leads 75 (10) to terminals plugs (9) on main harness (7).
3.
Connect two leads 75 (11) to booster stoplight switch (12).
4.
Connect two leads 75 (5) to pressure switch (4) on crossmember (3).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0406 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version