 |
|||
|
|
|||
|
Page Title:
AIR BRAKE ROTARY VALVE AND AIR LINE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0405 00
AIR BRAKE ROTARY VALVE AND AIR LINE REPLACEMENT (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs.
Small parts under pressure may shoot out with high velocity,
causing injury to personnel.
Eyeshields must be worn when releasing compressed air.
Failure to do so may result in injury to personnel.
CAUTION
When disconnecting air lines and hoses, plug all openings to
prevent dirt from entering and causing damage to internal
parts. Remove plugs prior to installation.
1.
Remove tiedown strap (36) from air lines (16) and (17). Discard tiedown strap (36).
2.
Loosen nuts (5), (15), and (37) and remove air lines (4), (16), and (17), with inserts (6), (7),
and (14), from three straight adapters (8).
3.
Loosen nuts (3), (18), and (21) and remove other end of air lines (4), (16), and (17), with
inserts (2), (19), and (22), from elbows (1), (20), and (23).
4.
Remove elbows (20) and (23) from fittings (24).
5.
Loosen nuts (34) and (30) and remove air lines (35) and (29), with inserts (33) and (31), from
elbow (32) and straight adapter (28).
6.
Remove straight adapter (28) and elbow (32) from fitting (24).
7.
Remove two nuts (27), lockwashers (26), and fittings (24) from firewall (25).
8.
Remove two screws (12), lockwashers (11), clamp (10), and rotary valve (9) from steering
column (13). Discard lockwashers (11).
9.
Remove three straight adapters (8) from rotary valve (9).
0405 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version