 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER WIRING HARNESS AND RECEPTACLE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0404 00
SWINGFIRE HEATER WIRING HARNESS AND RECEPTACLE REPLACEMENT (Contd)
REMOVAL
1.
Loosen screw (7) and remove lead (5) from receptacle (6).
2.
Remove nut (3), lockring (4), and receptacle (6) from side panel (8).
3.
Remove twenty tiedown straps (17) from lighting harness (10) and lead 10A (9). Discard tiedown
straps (17).
4.
Disconnect plug (1) from connector (2) and remove lead (5).
5.
Disconnect plug (12) from circuit breaker (11).
6.
Remove nut (15), screw (13), clamp (14), and lead (9) from lighting harness (10) and
support (16).
INSTALLATION
1.
Install lead 10A (9) on lighting harness (10) with twenty new tiedown straps (17).
2.
Install lighting harness (10), lead 10A (9), and clamp (14) on support (16) with screw (13) and
nut (15).
3.
Connect plug (12) to circuit breaker (11).
4.
Connect plug (1) to connector (2) on lead (5).
5.
Install receptacle (6) on side panel (8) with lockring (4) and nut (3).
6.
Install lead (5) on receptacle (6) and tighten screws (7).
7.
Connect battery ground cable (WP 0126 00).
8.
Lower hood and secure (TM 9-2320-361-10).
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0404 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version