 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER WATER JACKET REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0401 00
SWINGFIRE HEATER WATER JACKET REPLACEMENT (Contd)
REMOVAL
NOTE
Have drainage container ready to catch coolant.
1.
Remove drain plug (5) and drain coolant from water jacket (4).
2.
Remove two nuts (14), lockwashers (15), screws (17), clamp (16), and exhaust tube (13) from
exhaust port (18). Discard lockwashers (15).
3.
Loosen clamps (7) and (12) and remove inlet hose (11) from inlet port (1) and outlet hose (6) from
outlet port (3).
4.
Remove two locknuts (9), screws (2), and water jacket (4) from brackets (8) and (10). Discard
locknuts (9).
INSTALLATION
1.
Install water jacket (4) on brackets (8) and (10) with two screws (2) and new locknuts (9).
2.
Install inlet hose (11) on inlet port (1) and outlet hose (6) on outlet port (3) and tighten clamps (12)
and (7).
3.
Install exhaust tube (13) on exhaust port (18) with two screws (17), new lockwashers (15), and
nuts (14).
4.
Apply sealant to male threads of drain plug (5).
5.
Install drain plug (5) on water jacket (4).
6.
Fill cooling system to proper level (WP 0076 00).
7.
Connect battery ground cable (WP 0126 00).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0401 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version