 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER BATTERY BOX TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0400 00
SWINGFIRE HEATER BATTERY BOX TUBE REPLACEMENT (Contd)
REMOVAL
1.
Remove two nuts (11), lockwashers (10), screws (7), clamp (9), and exhaust tube (8) from exhaust
elbow (16). Discard lockwashers (10).
2.
Remove four locknuts (13) and screws (15) from battery support plate (2) and running board
supports (6) and (14). Discard locknuts (13).
3.
Remove pan assembly (1), insulation (3), and battery support plate (2) from baffle plate (5).
4.
Remove six locknuts (12), screws (4), and baffle plate (5) from running board supports (6) and (14).
Discard locknuts (12).
INSTALLATION
1.
Install baffle plate (5) on running board supports (6) and (14) with six screws (4) and new
locknuts (12).
2.
Install pan assembly (1), insulation (3), and battery support plate (2) on baffle plate (5).
3.
Install battery support plate (2) on running board supports (6) and (14) with four screws (15) and
new locknuts (13).
4.
Install exhaust tube (8) and clamp (9) on exhaust elbow (16) with two screws (7), new
lockwashers (10) and nuts (11).
5.
Install battery box (WP 0127 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0400 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version