 |
|||
|
|
|||
|
Page Title:
DEEP WATER FORDING KIT CONTROL VALVE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0386 00
DEEP WATER FORDING KIT CONTROL VALVE REPLACEMENT (Contd)
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
REMOVAL
1.
Remove tubes (1) and (3) from elbows (2).
2.
Remove two locknuts (8), screws (10), and bracket (5) from instrument panel (9). Discard
locknuts (8).
3.
Remove two screws (7), plate (6), and bracket (5) from valve (4).
4.
Remove two elbows (2) from valve (4).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to
installation.
1.
Install two elbows (2) on valve (4).
2.
Install bracket (5) and plate (6) on valve (4) with two screws (7).
3.
Install bracket (5) on instrument panel (9) with two screws (10) and new locknuts (8).
4.
Install tubes (1) and (3) on elbows (2).
5.
Start engine (TM 9-2320-361-10) and allow air pressure to build up to normal operating range;
check for air leaks at valve.
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
10
9
2
3
8
2
4
7
5
6
END OF WORK PACKAGE
0386 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version