 |
|||
|
|
|||
|
Page Title:
PRIMARY HEATER FUEL PUMP REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0373 00
PRIMARY HEATER FUEL PUMP REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system
procedures near open flames. Injury or death to personnel may
result.
REMOVAL
1.
Disconnect wire connector (7) from connector (8).
2.
Remove fuel lines (9) from elbows (6).
3.
Remove two elbows (6) from heater fuel pump (1).
4.
Remove two screws (5), washers (4), clamp (2), wire (3), and heater fuel pump (1) from
van body (10).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to
installation.
1.
Install heater fuel pump (1), clamp (2), and wire (3) on van body (10) with two washers (4) and
screws (5).
2.
Install two elbows (6) on heater fuel pump (1).
3.
Install two fuel lines (9) on elbows (6).
4.
Connect wire connector (7) to connector (8).
5.
Install pump cover (WP 0374 00).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
4
5
10
6
9
9
7
8
END OF WORK PACKAGE
0373 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version