 |
|||
|
|
|||
|
Page Title:
CARGO BODY PERSONNEL HEATER FUEL LINE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0371 00
CARGO BODY PERSONNEL HEATER FUEL LINE REPLACEMENT (Contd)
REMOVAL
1.
Close fuel shutoff valve (9).
2.
Disconnect fuel line (12) and elbow (11) from tee (10).
3.
Disconnect fuel line (2) from shutoff valve (9).
4.
Remove shutoff valve (9) and tee (10) from fuel tank (8).
5.
Remove locknut (4), screw (14), two clamps (5), wiring harness(6), and fuel line (2) from front cargo
body panel (7). Discard locknut (4).
6.
Remove sleeve (15) from fuel line (2) and hole (3) in cargo body floor (13).
7.
Disconnect fuel line (2) from heater fuel pump (l).
8.
Straighten fuel line (2) and pull through cargo body floor (13).
INSTALLATION
1.
Install fuel line (2) through hole (3) in cargo body floor (13).
2.
Bend fuel line (2) and connect to heater fuel pump (1).
3.
Place sleeve (15) on fuel line (2) and install in hole (3).
4.
Install tee (10) and shutoff valve (9) on fuel tank (8).
5.
Connect fuel line (2) to shutoff valve (9).
6.
Connect elbow (11) and fuel line (12) to tee (10).
7.
Install fuel line (2) and wiring harness (6) on front cargo body panel (7) with two clamps (5),
screw (14), and new locknut (4).
8.
Open fuel shutoff valve (9).
9.
Start heater and check operation (TM 9-2320-361-10).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0371 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version