 |
|||
|
|
|||
|
Page Title:
PERSONNEL HEATER FUEL FILTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0354 00
PERSONNEL HEATER FUEL FILTER REPLACEMENT (Contd)
REMOVAL
1.
Disconnect tube (11) from fuel pump elbow (1) and adapter (10).
2.
Disconnect fuel line (3) from tube (4).
3.
Disconnect tube (4) from elbow (5).
4.
Remove elbow (5) from tee (6).
NOTE
Perform step 5 if vehicle is equipped with engine coolant heater.
5.
Disconnect fuel line (12) from tee (6).
6.
Remove tee (6) from fuel filter (7).
7.
Remove two screws (8), lockwashers (9), and fuel filter (7) from plate (2). Discard lockwashers (9).
8.
Remove adapter (10) from fuel filter (7).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to installation.
1.
Install adapter (10) on fuel filter (7).
2.
Install fuel filter (7) on plate (2) with two new lockwashers (9) and screws (8).
3.
Install tee (6) on fuel filter (7).
4.
Install elbow (5) on tee (6).
5.
Connect fuel line (3) to tube (4).
NOTE
Perform step 6 if vehicle is equipped with engine coolant heater.
6.
Connect two fuel lines (12) and (4) to tee (6).
7.
Connect tube (11) to fuel pump elbow (1) and adapter (10).
8.
Connect battery ground cable (WP 0126 00).
9.
Lower and secure hood (TM 9-2320-361-10).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0354 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version