 |
|||
|
|
|||
|
Page Title:
CONVERTER RECEPTACLE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0331 00
CONVERTER RECEPTACLE REPLACEMENT (Contd)
NOTE
Prior to removal, tag all lead wires for installation.
24-VOLT CONVERTER RECEPTACLE REMOVAL
1.
Remove socket (12) from receptacle (2).
2.
Remove four machine screws (1) and receptacle (2) from van wall (6). Discard machine screws (1).
3.
Pull back three insulation tubings (5) from three receptacle pins (3).
4.
Unsolder and remove three wires (4) from three receptacle pins (3) (TC 9-237).
24-VOLT CONVERTER RECEPTACLE INSTALLATION
1.
Insert three wires (4) into three receptacle pins (3) and solder in place (TC 9-237).
2.
Install three insulation tubings (5) on three receptacle pins (3).
3.
Install receptacle (2) on van wall (6) with four new machine screws (1).
4.
Install socket (12) on receptacle (2).
5.
Install van body primary heater (WP 0380 00).
115-VOLT CONVERTER RECEPTACLE REMOVAL
1.
Remove plug (11) from receptacle (9).
2.
Remove two screws (10) and receptacle (9) from van wall (6).
3.
Remove two screws (7) and wires (8) from receptacle (9).
115-VOLT CONVERTER RECEPTACLE INSTALLATION
1.
Install two wires (8) on receptacle (9) with two screws (7).
2.
Install receptacle (9) on van wall (6) with two screws (10).
3.
Install plug (11) on receptacle (9).
4.
Install van body primary heater (WP 0380 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0331 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version