|
|
TM 9-2320-361-24-2
0323 00
VAN BODY ACCESS PLATE, ACCESS COVER, AND RETAINER ASSEMBLY (Contd)
ACCESS PLATE REMOVAL
Remove four screw-assembled lockwashers (2) and access plate (3) from van wall (4). Discard screw-
assembled lockwashers (2).
ACCESS PLATE INSTALLATION
Install access plate (3) on van wall (4) with four new screw-assembled lockwashers (2).
ACCESS COVER REMOVAL
Remove six screw-assembled lockwashers (1) and access cover (10) from van wall (4). Discard screw-
assembled lockwashers (1).
ACCESS COVER INSTALLATION
Install access cover (10) on van wall (4) with six new screw-assembled lockwashers (l).
RETAINER ASSEMBLY REMOVAL
1.
Remove ten screw-assembled lockwashers (7) and two retainers (6) from van wall (4). Discard
screw-assembled lockwashers (7).
2.
Remove four screw-assembled lockwashers (7) and retainer (9) from van wall (4). Discard screw-
assembled lockwashers (7).
3.
Remove four screw-assembled lockwashers (7), retainer with door catch (8), and weather seal (5)
from van wall (4). Discard screw-assembled lockwashers (7).
RETAINER ASSEMBLY INSTALLATION
1.
Install weather seal (5) and retainer with door catch (8) on van wall (4) with four new screw-
assembled lockwashers (7).
2.
Install retainer (9) on van wall (4) with four new screw-assembled lockwashers (7).
3.
Install two retainers (6) on van wall (4) with ten new screw-assembled lockwashers (7).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0323 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |