 |
|||
|
|
|||
|
Page Title:
SIDE WINDOW SASH MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0321 00
SIDE WINDOW SASH MAINTENANCE (Contd)
REMOVAL
1.
Remove lever ring (9), eighteen screw-assembled lockwashers (10), and screen (8) from sash
frames (1) and (4). Discard screw-assembled lockwashers (10).
NOTE
Pull down blackout panel from outside van body.
2.
Remove eight screw-assembled lockwashers (14), two screw-assembled lockwashers (17), two
guides (15), and blackout panel (16) from van body wall (6). Discard screw-assembled
lockwashers (14) and (17).
3.
Remove six screw-assembled lockwashers (12) and hinge (13) from van body wall (6). Discard
screw-assembled lockwashers (12).
4.
Remove twenty-two screws (11), sash frames (1) and (4), weatherstrip (2), and window glass (3)
from van body wall (6).
5.
Drill rivet (5) out of arm (7) and remove arm (7) from sash frame (4). Discard rivet (5).
INSPECTION AND REPAIR
Inspect screen (8), blackout panel (16), two guides (15), and window glass (3) for holes, bends, dents, or
cracks. Repair screen (8) by patching. Replace cracked window glass (3). Replace blackout panel (16) or
guide(s) (15) if bent, dented, or cracked.
INSTALLATION
1.
Install arm (7) on sash frame (4) with new rivet (5).
2.
Install weatherstrip (2) on window glass (3).
3.
Install window glass (3) and sash frame (4) on sash frame (1) with twenty-two screws (11).
4.
Install hinge (13) on van body wall (6) with six new screw-assembled lockwashers (12).
5.
Install two guides (15) and blackout panel (16) on van body wall (6) with eight new screw-
assembled lockwashers (14) and two new screw-assembled lockwashers (17).
6.
Install screen (8) on sash frames (1) and (4) with eight new screw-assembled lockwashers (10).
7.
Install lever ring (9) on arm (7).
8.
Connect battery ground cable (WP 0126 00).
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0321 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version