 |
|||
|
|
|||
|
Page Title:
FRONT WINDOW SASH MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0320 00
FRONT WINDOW SASH MAINTENANCE (Contd)
REMOVAL
1.
Slide blackout panel (1) open and remove eight screw-assembled lockwashers (3) and upper and
lower guides (2), with blackout panel (1) attached, from van body wall (4). Discard screw-assembled
lockwashers (3).
2.
Remove eighteen screw-assembled lockwashers (10) and sash frames (5) and (9) from van body
wall (4). Discard screw-assembled lockwashers (10).
3.
Remove twenty-two screws (6), sash frame (5), weatherstrip (8), and window glass (7) from sash
frame (9).
INSPECTION AND REPAIR
1.
Inspect blackout panel (1), guides (2), and sash frames (5) and (9) for bends, dents, and tears.
Replace blackout panel (1), guide(s) (2), and sash frame(s) (5) and (9) if bent, dented, or torn.
2.
Inspect window glass (7) for cracks. Inspect weatherstrip (8) for tears and wear. Replace cracked
window glass (7) and torn or worn weatherstrip (8).
INSTALLATION
1.
Install weatherstrip (8) on window glass (7).
2.
Install window glass (7) between sash frames (5) and (9) with twenty-two screws (6).
3.
Install sash frames (5) and (9) on van body wall (4) with eighteen new screw-assembled
lockwashers (10).
4.
Install upper and lower guides (2) with blackout panel (1) on van body wall (4) with eight new
screw-assembled lockwashers (3).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0320 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version