 |
|||
|
|
|||
|
Page Title:
CIRCUIT BREAKER HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0319 00
CIRCUIT BREAKER HARNESS REPLACEMENT (Contd)
REMOVAL
NOTE
Prior to removal, tag lead wires for installation.
1.
Remove harness (3) from receptacle (2).
2.
Remove cables (6) and (7) from 24V circuit breaker (11).
3.
Remove six screws (5), harness mounting clamps (4), and harness (3) from van body (1).
4.
Disconnect cable (7) from battery terminal (8).
NOTE
Perform step 5 if van body heater fuel pump is installed on
vehicle.
5.
Remove cable (9) from fuel pump (10).
INSTALLATION
1.
Install harness (3) on receptacle (2).
2.
Install cables (6) and (7) on 24V circuit breaker (11).
3.
Install six harness mounting clamps (4) and harness (3) on van body (1) with six screws (5).
4.
Connect cable (7) to battery terminal (8).
NOTE
Perform step 5 if van body heater fuel pump is installed on
vehicle.
5.
Connect cable (9) to fuel pump (10).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0319 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version