 |
|||
|
|
|||
|
Page Title:
MULTIBREAKER BOX REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0317 00
MULTIBREAKER BOX REPLACEMENT (Contd)
REMOVAL
NOTE
Prior to removal, tag lead wires and terminals for installation.
1.
Remove four screws (7), lockwashers (6), and cover (5) from multibreaker box (12). Discard
lockwashers (6).
2.
Remove four screws (16) and wires (15) from multibreaker box (12).
3.
Loosen five screws (17) and remove five wires (20).
4.
Loosen two screws (19) and remove three wires (18).
5.
Remove bushing (4) from nipple (1).
6.
Remove bushing (8) from nipple (13).
7.
Remove two nuts (10) and lockwashers (11) from studs (3) on mounting bracket (2).
8.
Remove multibreaker box (12) and nut (9) from nipple (13) and van body (14). Discard
lockwashers (11).
INSTALLATION
1.
Route wires through access hole in multibreaker box (12).
2.
Install nut (9) on nipple (13) and position multibreaker box (12) on nipples (13) and (1).
3.
Install multibreaker box (12) on studs (3) of mounting bracket (2) and van body (14) with two new
lockwashers (11) and nuts (10).
4.
Install multibreaker box (12) on nipple (13) with bushing (8).
5.
Install multibreaker box (12) on nipple (1) with bushing (4).
6.
Install three wires (18) in multibreaker box (12) and tighten two screws (19).
7.
Install five wires (20) in multibreaker box (12) by tightening five screws (17).
8.
Install four wires (15) in multibreaker box (12) with four screws (16).
9.
Install cover (5) on multibreaker box (12) with four new lockwashers (6) and screws (7).
10.
Connect battery ground cable (WP 0126 00).
11.
Place safety switch in ON position (TM 9-2320-361-10).
12.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0317 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version