 |
|||
|
|
|||
|
Page Title:
BLACKOUT MASTER SWITCH REPLACEMENT (M109A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0316 00
BLACKOUT MASTER SWITCH REPLACEMENT (M109A3) (Contd)
REMOVAL
1.
Remove four screws (3), lockwashers (4), and cover (1) from blackout master switch (2). Discard
lockwashers (4).
NOTE
Prior to removal, tag lead wires and terminals for installation.
2.
Remove five screws (8), lockwashers (7), and wires (5), (6), (9), (10), (11), (12), and (13) from
blackout master switch (2). Discard lockwashers (7).
3.
Remove bushing (16) from nipple (15).
4.
Remove two nuts (17), lockwashers (18), and blackout master switch (2) from mounting
bracket (14). Discard lockwashers (18).
INSTALLATION
1.
Install blackout master switch (2) on mounting bracket (14) with two new lockwashers (18) and
nuts (17).
2.
Install blackout master switch (2) on nipple (15) with bushing (16).
3.
Install wires (5), (6), (9), (10), (11), and one end of (12) on blackout master switch (2) with four
lockwashers (7) and screws (8).
4.
Install wire (13) and other end of wire (12) on blackout master switch (2) with new lockwasher (7)
and screw (8).
5.
Install cover (1) on blackout master switch (2) with four new lockwashers (4) and screws (3).
6.
Connect battery ground cable (WP 0126 00).
7.
Check blackout light operations (TM 9-2320-361-10).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0316 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version