 |
|||
|
|
|||
|
Page Title:
115- AND 24-VOLT WIRING HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0315 00
115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
24.
Install nut (2) and wires (3) and (4) on safety switch box (1) with capnut (5).
25.
Back out nut (2) to tighten leads (3) and (4) against capnut (5).
26.
Install two wires (6) on fuse block (8) and tighten two screws (7).
27.
Insert wires (18) and (25) through nipple (23) and into multibreaker box (10).
28.
Insert wire (27) through nipple (23), multibreaker box (10), nipple (9) and into blackout
switch (26).
29.
Insert wires (24) through nipple (23), multibreaker box (10), nipple (9), and into blackout
switch (26).
30.
Install wire (21) on multibreaker box (10) with screw (22).
31.
Insert opposite end of wire (21) through nipple (9) and into blackout switch (26).
32.
Position wire (18) in multibreaker box (10) and tighten screw (19).
33.
Position wires (25) and (14) in multibreaker box (10) and tighten screw (28).
34.
Insert wire (20) in bridge (15) and tighten screw (17).
35.
Install three wires (12) on multibreaker box (10) with three screws (13).
36.
Insert four wires (11) in bridge (15) and tighten four screws (16).
2
3
1
4
5
6
8
7
7
6
0315 00-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version