 |
|||
|
|
|||
|
Page Title:
115- AND 24-VOLT WIRING HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0315 00
115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
12.
Remove safety wire (3) from wire bunches (1), (2), and (4).
13.
Insert wires (4) through access hole in safety switch box (6).
14.
Install safety switch box (6) on mounting brackets (5) with four new lockwashers (7) and nuts (8).
NOTE
Perform steps 15 through 17 for M185A3 vehicles.
15.
Position nipple (10) with switch bracket (12) through safety switch box (6) and secure nipple (10)
with bushing (9).
16.
Install spacer (15) and switch bracket (12) on van wall (14) with two screws (11).
17.
Install start/stop switch (13) into switch bracket (12).
18.
Insert wires (2) in access hole of multibreaker box (16).
19.
Secure multibreaker box (16) on nipple (20) with bushing (17).
20.
Install multibreaker box (16) on mounting brackets (5) with two new lockwashers (19) and
nuts (18).
21.
Insert wires (1) through access hole in blackout switch (23).
22.
Position blackout switch (23) on nipple (21) and secure with bushing (22).
23.
Install blackout switch (23) on mounting bracket (26) with two new lockwashers (25) and
nuts (24).
2
1
ELECTRICAL TAPE
3
3
4
3
0315 00-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version