 |
|||
|
|
|||
|
Page Title:
115- AND 24-VOLT WIRING HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0315 00
115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION
CAUTION
Use care when installing wiring harnesses. Excessive snagging
or pulling may damage wires.
NOTE
Safety wire must be secured to wiring harnesses with electrical
tape.
1.
Position main wiring harness (2) in roof (3).
2.
Secure main wiring harness (2) by closing tabs (1).
3.
Install three grommets (9) and two grommets (13) in van wall (4).
4.
Attach safety wires (7) to five wire leads (5), (6), (8), (11), and (12).
NOTE
Do not remove safety wire from wire leads until wires are
connected.
5.
Pull safety wires (7) so that wire leads (5), (6), (8), (11), and (12) are pulled through van wall (4).
2
3
~
1
0315 00-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version