 |
|||
|
|
|||
|
Page Title:
115-VOLT RECEPTACLE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0311 00
115-VOLT RECEPTACLE REPLACEMENT (Contd)
REMOVAL
NOTE
Prior to removal, tag lead wires, terminals, and cables for
installation.
1.
Remove cap (1), clip (2), and cover (3) from base (5) on van wall (4).
2.
Remove two screws (7) from receptacle (6) and retainers (8).
3.
Pull receptacle (6) away from van wall (4).
4.
Loosen three screws (10) and remove six wire leads (9) from receptacle (6).
5.
Remove receptacle (6) from van wall (4).
6.
Remove two retainers (8) from base (5).
INSTALLATION
1.
Install two retainers (8) on base (5).
2.
Install six wire leads (9) on receptacle (6) by tightening three screws (10).
3.
Install receptacle (6) on two retainers (8) with two screws (7).
4.
Install cover (3), clip (2), and cap (1) on base (5).
5.
Connect battery ground cable (WP 0126 00).
6.
Place safety switch in ON position (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0311 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version