 |
|||
|
|
|||
|
Page Title:
VAN DOOR MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0305 00
VAN DOOR MAINTENANCE (Contd)
LEFT VAN DOOR DISASSEMBLY
1.
Remove four screws (7), lockwashers (8), and latch (9) from van door (6). Discard lockwashers (8).
2.
Remove two screws (12), lockwashers (11), and plate (10) from van door (6). Discard
lockwashers (11).
3.
Remove two screw-assembled lockwashers (13) and guide (14) from rod (15) and van door (6).
Discard screw-assembled lockwashers (13).
4.
Remove four screws (3), lockwashers (4), lock (5), and rod (15) from van door (6). Discard
lockwashers (4).
5.
Remove two screws (2) and holder (1) from van door (6).
RIGHT VAN DOOR DISASSEMBLY
1.
Remove eight screws (32), four spacers (25), and two guides (31) from van door (24).
2.
Remove cotter pin (37) and inside door handle (36) from van door (24). Discard cotter pin (37).
3.
Remove four screws (30), lockwashers (29), and lock (28) from van door (24). Discard
lockwashers (29).
4.
Remove two screws (33), upper rod (26), and lower rod (34) from two guides (31).
5.
Remove two cotter pins (27) and (35), upper rod (26), and lower rod (34) from lock (28). Discard
cotter pins (27) and (35).
6.
Remove two screws (17) and holder (16) from van door (24).
7.
Remove three screws (18), lockwashers (19), spacer (21), and outside handle (20) from van
door (24). Discard lockwashers (19).
8.
Remove screw (23) and padlock (22) from van door (24).
CLEANING AND INSPECTION
1.
Inspect latch (9), plates (10), guides (14) and (31), lock (28), rods (34), (15), and (26), handles (36)
and (20), and doors (6) and (24) for cracks, bends, and excessive wear. Replace cracked, bent, or
excessively worn components.
WARNING
Skysol 100 solvent is combustible; DO NOT use or store near heat,
sparks, flame, or other ignition sources. Use mechanical ventilation
whenever product is used in a confined space, heated above ambient
temperatures, or agitated. Keep container sealed when not in use.
Contact with Skysol 100 may cause skin irritation. Use chemical-
resistant gloves. In case of skin contact, remove any contaminated
clothing and wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may cause irritation,
tearing, or blurring of vision. Use face shield or goggles when eye
contact may occur. In case of eye contact, flush eyes with large
amounts of water for at least 15 minutes or until irritation subsides.
Inhalation may cause irritation to upper respiratory passages. DO
NOT have food or drink in the vicinity. Failure to comply may result
in injury to personnel.
2.
Clean latch (9), plates (10), guides (14) and (31), lock (28), rods (26), (15), and (34), and handles (36)
and (20) with Skysol 100 solution. Air dry all parts.
0305 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version