 |
|||
|
|
|||
|
Page Title:
TANK BODIES UPPER AND LOWER REAR SPLASH GUARD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0296 00
TANK BODIES UPPER AND LOWER REAR SPLASH GUARD REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flames. Injury or death to personnel may result.
LOWER SPLASH GUARD REMOVAL
Remove three locknuts (6), screws (8), retainer strip (9), and lower splash guard (10) from upper splash
guard (4). Discard locknuts (6).
UPPER SPLASH GUARD REMOVAL
1. Remove two locknuts (7) and screws (12) from braces (11) and upper splash guard (4). Discard
locknuts (7).
2.
Remove two locknuts (13), screws (2), and braces (11) from crossmember (1). Discard locknuts (13).
3.
Remove three locknuts (5), screws (3), and upper splash guard (4) from crossmember (14). Discard
locknuts (5).
UPPER SPLASH GUARD INSTALLATION
1. Install upper splash guard (4) on crossmember (14) with three screws (3) and new locknuts (5).
2.
Install two braces (11) on crossmember (1) with two screws (2) and new locknuts (13).
3.
Install two braces (11) on upper splash guard (4) with two screws (12) and new locknuts (7).
LOWER SPLASH GUARD INSTALLATION
1. Install retainer strip (9) and lower splash guard (10) on upper splash guard (4) with three
screws (8) and new locknuts (6).
2.
Connect battery ground cable (WP 0126 00).
3.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
3
2
1
4
5
~
14
8
6
11
7
13
12
9
10
END OF WORK PACKAGE
0296 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version