 |
|||
|
|
|||
|
Page Title:
TANK BODIES FRONT SPLASH GUARD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0295 00
TANK BODIES FRONT SPLASH GUARD REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flames. Injury or death to personnel may result.
NOTE
Left and right front splash guards are replaced the same way.
REMOVAL
1.
Remove two locknuts (8) and screws (9) from braces (7) and splash guard (10). Discard
locknuts (8).
2.
Remove two locknuts (6), screws (5), and braces (7) from frame (4). Discard locknuts (6).
NOTE
Perform step 3 on left side of vehicle if vehicle is equipped with
pioneer tool kit.
3.
Remove two locknuts (13) and screws (1) from pioneer tool bracket (12) and splash guard (10).
Discard locknuts (13).
4.
Remove three locknuts (11), screws (3), and splash guard (10) from frame (2). Discard
locknuts (11).
INSTALLATION
1.
Install splash guard (10) on frame (2) with three screws (3) and new locknuts (11).
NOTE
Perform step 2 on left side of vehicle if vehicle is equipped with
pioneer tool kit.
2.
Install pioneer tool bracket (12) on splash guard (10) with two screws (1) and new locknuts (13).
3.
Install two braces (7) on frame (4) with two screws (5) and new locknuts (6).
4.
Install two braces (7) on splash guard (10) with two screws (9) and new locknuts (8).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0295 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version