 |
|||
|
|
|||
|
Page Title:
DELIVERY PUMP REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0280 00
DELIVERY PUMP REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures near open
flames. Injury or death to personnel may result.
Accidental or intentional introduction of liquid contaminants into the
environment is a violation of state, federal, and military regulations. Refer to
Army POL (WP 0001 00) for information concerning storage, use, and disposal
of these liquids. Failure to do so may result in damage to environment and
health of personnel.
NOTE
Use a drain pan to capture any draining fuel. Dispose of fluids in accordance
with local policy and ordinances. Ensure all spills are cleaned up.
REMOVAL
1.
Remove setscrew (1) from delivery pump rear propeller shaft (8) and delivery pump shaft (5).
2.
Remove four locknuts (6), screws (3), and delivery pump (2) from compartment shelf (4). Discard
locknuts (6).
3.
Remove woodruff key (7) from delivery pump shaft (5). Discard woodruff key (7).
INSTALLATION
1.
Install new woodruff key (7) in delivery pump shaft (5).
2.
Position delivery pump (2) on compartment (4).
3.
Install delivery pump rear propeller shaft (8) on delivery pump shaft (5) with setscrew (1).
4.
Install delivery pump (2) on compartment shelf (4) with four screws (3) and new locknuts (6).
5.
Install delivery pump outlet tube (WP 0277 00).
6.
Install delivery pump inlet tube (WP 0278 00).
7.
Install delivery pump drain valve (WP 0281 00).
8.
Lubricate pump and shaft (WP 0020 00).
9.
Connect battery ground cable (WP 0126 00).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
8
5
3
7
4
6
END OF WORK PACKAGE
0280 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version