 |
|||
|
|
|||
|
Page Title:
DISCHARGE VALVE REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0265 00
DISCHARGE VALVE REPAIR (Contd)
ASSEMBLY
1.
Install new gasket (9) in bore (8) of valve housing (7).
2.
Position cam (6) inside valve housing (7) with rounded edge facing up.
3.
Insert cam stem (10) in bore (8) through cam (6) until seated.
4.
Install two new O-rings (11) and (14) in bore (12) of nut (13). Wrap nut (13) threads with antiseize
tape and install nut (13) over cam stem (10) into valve housing (7).
5.
Install holder (1) and new disc (17) on stem (5) with retainer (16).
6.
Position stem (5) with holder (1), new disc (17), and retainer (16) in valve housing (7) until seated.
WARNING
Eye protection must be worn during spring and cap installation.
Failure to do so may result in injury to personnel.
7.
Position spring (4) over stem (5) on holder (1).
8.
Install cap (3) on stem (5), compressing spring (4) into valve housing (7), with four setscrews (15).
9.
Install strainer (2) over valve housing (7).
10.
Install discharge valve (WP 0263 00).
0265 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version