CARGO BODIES MAINTENANCE - continued - TM-9-2320-361-24-20270

TM 9-2320-361-24-2

0262 00

CARGO BODIES MAINTENANCE (Contd)

INSTALLATION (Contd)

Install trailer receptacle (3) behind cargo body (2) with four screws (1) and new locknuts (4).

NOTE

M35A2 front right side bracket mounting screws secure two sets

of springs positioned on top of body brackets. Left side spring

sets are the same and are secured below frame brackets.

Install four screws (16) in two brackets (5) and brackets (17). Install four springs (20) inside four

springs (21) and over four screws (16) with four washers (19) and new locknuts (18).

Adjust spring screws (16) to set springs (20) and (21) height to 6.375 in. (16.19 cm).

NOTE

M36A2 long wheelbase models have two additional body and

frame brackets. Perform step 8 for hardware installation.

Install four screws (12) in two brackets (7) and brackets (13) with four washers (15) and new

locknuts (14). Tighten locknuts (14) 105145 lb-ft (142197 Nm).

Install six screws (8) to six brackets (6) and brackets (9) with six washers (11) and new

locknuts (10). Tighten locknuts (10) 125165 lb-ft (170224 Nm).

10.

Remove lifting device, chains, and guide lines from cargo body (2).

11.

Install cargo body upper and lower rear splash guards (WP 0256 00).

12.

Install cargo body front splash guards (WP 0257 00).

13.

Install cargo body front rack (TM 9-2320-361-10).

14.

Install troop seat and cargo body side racks (TM 9-2320-361-10).

15.

Connect battery ground cable (WP 0126 00).

16.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

0262 00-6