 |
|||
|
|
|||
|
Page Title:
CARGO BODY DROPSIDE REPLACEMENT (M35A2C) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0259 00
CARGO BODY DROPSIDE REPLACEMENT (M35A2C) (Contd)
REMOVAL
1.
With cargo body dropside (7) in lowered position, attach sling (1) to lifting device (2) and cargo
body dropside (6).
2.
Raise lifting device (2) until cargo body dropside (7) is raised to vertical position.
WARNING
All personnel must stand clear during lifting operations. A
swinging or shifting load may result in injury to personnel.
All personnel must stand clear during removal of cargo body
Dropside. Cargo body dropside will swing free when pins are
removed and injury to personnel may result.
3.
Remove ten cotter pins (3), washers (4), and five pins (5) from hinges (6). Discard cotter pins (3).
4.
Lower dropside (7) to ground and remove lifting device (2) and chain sling (1) from dropside (7).
INSTALLATION
1.
Attach chain sling (1) to cargo dropside (7) and attach lifting device (2) to chain sling (1).
NOTE
Assistant will help with steps 2 and 3.
2.
Raise cargo body dropside (7) and position to hinges (6).
3.
Install cargo body dropside (7) on hinges (6) with five pins (5), ten washers (4), and ten new cotter
pins (3).
4.
Lower cargo body dropside (7) to the lowered position and remove lifting device (2) and chain sling (1).
5.
Raise cargo body dropsides (TM 9-2320-361-10).
6.
Raise tailgate (TM 9-2320-361-10).
7.
Install troop seat and cargo body side rack (TM 9-2320-361-10).
8.
Install bow and tarp (if removed) (TM 9-2320-361-10).
9.
Connect battery ground cable (WP 0126 00).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0259 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version