 |
|||
|
|
|||
|
Page Title:
PERSONNEL HOT WATER HEATER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0250 00
PERSONNEL HOT WATER HEATER REPLACEMENT (Contd)
NOTE
In some installations, fresh air hood, screen, and elbow are
mounted on left side panel.
HOSES AND ADAPTERS REMOVAL
1.
Loosen two clamps (1) and remove inlet hose (14) from elbow (24) and adapter (17).
2.
Loosen two clamps (1) and remove outlet hose (13) from adapters (9) and (12).
3.
Remove eight screws (11), lockwashers (10), and adapter (12) from heater (4). Discard
lockwashers (10).
4.
Remove four screws (15), lockwashers (16), and adapter (17) from heater (4). Discard
lockwashers (16).
5.
Remove three locknuts (2), elbow (24), screen (23), hood (20), and three screws (19) from hood side
panel (21). Discard locknuts (2).
HEATER REMOVAL
1.
Disconnect electrical plugs (5).
2.
Remove screw (7), clamp (6), and wire (8) from heater (4).
3.
Remove four locknuts (18), heater (4), and screws (3) from bracket (22). Discard locknuts (18).
0250 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version