 |
|||
|
|
|||
|
Page Title:
PERSONNEL HEATER CONTROL CABLES MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0249 00
PERSONNEL HEATER CONTROL CABLES REPLACEMENT (Contd)
REMOVAL
1.
Loosen screw (6) and remove cable (7) from shaft (5) and clamp (4) on diverter (3).
2.
Loosen screw (16) and remove cable (8) from shaft (18) and clamp (19) on adapter (17).
3.
Remove two nuts (1), lockwashers (2), screws (10), and bracket (9) from instrument panel (15).
Discard lockwashers (2).
4.
Remove nut (13), lockwasher (11), and cable (8) from bracket (9). Discard lockwasher (11).
5.
Remove nut (14), lockwasher (12), and cable (7) from bracket (9). Discard lockwasher (12).
INSTALLATION
1.
Install cable (7) in bracket (9) with new lockwasher (12) and nut (14).
2.
Install cable (8) in bracket (9) with new lockwasher (11) and nut (13).
3.
Install bracket (9) to instrument panel (15) with two screws (10), new lockwashers (2), and
nuts (1).
4.
Insert cable (8) through clamp (19) and install on shaft (18) of adapter (17).
5.
Insert cable (7) through clamp (4) and install on shaft (5) of diverter (3).
ADJUSTMENT
1.
Loosen screw (16) and slide cable (8) through clamp (19).
2.
Push shaft (18) of adapter (17) forward and tighten screw (16).
3.
Loosen screw (6) and slide cable (7) through clamp (4).
4.
Push shaft (5) of diverter (3) to the right, and tighten screw (6).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0249 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version