 |
|||
|
|
|||
|
Page Title:
MIRROR AND BRACKETS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0244 00
MIRROR AND BRACKETS REPLACEMENT (Contd)
REMOVAL
1.
Remove bolt (26), convex mirror (17), locknut (16), washer (15), two brackets (23), and screw (25)
from brace (24). Discard locknut (16).
2.
Remove two locknuts (18), washers (19), spacers (20), and mirror (21) from bracket (22). Discard
locknuts (18).
3.
Remove two locknuts (10), four washers (11) and (14), rod (30), brace (24), and bracket (22) from
braces (12), (13), (27), (28), and (29). Discard locknuts (10).
4.
Remove locknut (7), washer (6), hinge bolt (9), and braces (13) and (27) from upper door hinge (5).
Discard locknut (7).
5.
Install hinge bolt (9) in upper door hinge (5).
6.
Remove locknut (7), washer (6), hinge bolt (9), and brace (29) from top of lower door hinge (31).
Discard locknut (7).
7.
Install hinge bolt (9) in lower door hinge (31).
8.
Remove locknut (7), washer (6), screw (8), and braces (12) and (28) from clip (4). Discard locknut (7).
9.
Remove two locknuts (1), plate (2), clip (4), and screws (32) from cowling (3). Discard locknuts (1).
INSTALLATION
1.
Install clip (4) and plate (2) on cowling (3) with two screws (32) and new locknuts (1).
2.
Install braces (12) and (28) on clip (4) with screw (8), washer (6), and new locknut (7).
3.
Remove hinge bolt (9) from lower door hinge (31).
4.
Install brace (29) on top of lower door hinge (31) with hinge bolt (9), washer (6), and new locknut (7).
5.
Remove hinge bolt (9) from upper door hinge (5).
6.
Install braces (13) and (27) on upper door hinge (5) with hinge bolt (9), washer (6), and new
locknut (7).
7.
Install bracket (22), brace (24), and rod (30) on braces (12), (13), (27), (28), and (29) with four
washers (11) and (14) and two new locknuts (10).
8.
Install two spacers (20) on mirror (21) and install mirror (21) on bracket (22) with two
washers (19) and new locknuts (18).
9.
Install convex mirror (17) on brace (24) with two brackets (23), screw (25), washer (15), new
locknut (16), and bolt (26).
10.
Connect battery ground cable (WP 0126 00).
11.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0244 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version