 |
|||
|
|
|||
|
Page Title:
FRONT FENDERS MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0238 00
FRONT FENDERS MAINTENANCE (Contd)
INSTALLATION
NOTE
Assistant will help with step 1.
1.
Install fender mount spacer (24), new anti-squeak material (1), and fender (13) on cowl (4) and
fender support (21) with three new screw-assembled lockwashers (16), springs (27), nine
washers (23), screws (26), and new locknuts (22). Do not tighten locknuts (22) or screw-assembled
lockwashers (16).
2.
Install brace (18) on frame (5) and fender (13) with new screw-assembled lockwasher (19),
screw (17), and new locknut (14). Do not tighten screw-assembled lockwasher (19) or locknut (14).
3.
Install two screws (15), washers (2), and new locknuts (3) on brace (20) and fender (13). Do not
tighten locknuts (3).
4.
Install fender (13) to light support bracket (10) with two screws (7), washers (6), and new
locknuts (12). Do not tighten locknuts (12).
5.
Install fender (13) to light support bracket (10) with three washers (9), screws (8), washers (9), and
new locknuts (11). Do not tighten locknuts (11).
NOTE
Assistant will help with step 6.
6.
Align fender (13) with cowl (4), brace (20), support (21), and light support bracket (10). Tighten
screw-assembled lockwashers (16) and (19) and locknuts (22), (3), (11), (12), and (14).
7.
Install wiring harness (25) on fender support (21) with two clamps (29), screws (30), and new
locknuts (28).
8.
Install exhaust system (right side only) (WP 0073 00 or WP 0074 00).
9.
Install air horn (right side only) (WP 0114 00).
10.
Install front composite light housing and brackets (WP 0122 00).
11.
Install side panel (WP 0218 00).
12.
Install front wheels (TM 9-2320-361-10).
13.
Connect battery ground cable (WP 0126 00).
14.
Lower and secure hood (TM 9-2320-361-10).
15.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0238 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version