 |
|||
|
|
|||
|
Page Title:
FRONT FENDERS MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0238 00
FRONT FENDERS MAINTENANCE (Contd)
NOTE
Right and left fenders are replaced the same. This procedure
covers right side.
REMOVAL
1.
Remove two screws (30), locknuts (28), clamps (29), and wiring harness (25) from fender
support (21). Discard locknuts (28).
2.
Remove three screw-assembled lockwashers (16) from fender (13) and cowl (4). Discard
screw-assembled lockwashers (16).
3.
Remove three locknuts (22), screws (26), fender mount springs (27), and nine washers (23) from
fender (13) and fender support (21). Discard locknuts (22).
4.
Remove two locknuts (12), screws (7), and washers (6) from light support bracket (10) and
fender (13). Discard locknuts (12).
5.
Remove three locknuts (11), washers (9), screws (8), and washers (9) from fender (13) and light
support bracket (10). Discard locknuts (11).
6.
Remove screw-assembled lockwasher (19), locknut (14), screw (17), and brace (18) from flame (5).
Discard screw-assembled lockwasher (19) and locknut (14).
NOTE
Assistant will help with step 7.
7.
Remove two locknuts (3), screws (15), washers (2), fender (13), and fender mount spacer (24) from
fender support (21), bracket (20), cowl (4), and light support bracket (10). Discard locknuts (3).
8.
Remove anti-squeak material (1) from cowl (4). Discard anti-squeak material (1).
INSPECTION AND REPAIR
1.
Inspect fender for rust, dents, bends, and cracks.
2.
Refer to WP 0020 00 for general inspection procedure.
3.
Refer to TC 9-237 for welding instructions.
4.
Refer to TC 9-510 for metal body repair.
5.
Refer to TB 43-0213 for rustproofing instructions.
0238 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version