|
|
TM 9-2320-361-24-2
0235 00
DRIVER'S SEAT BASE MAINTENANCE (Contd)
NOTE
Assistant will help with entire procedure.
REMOVAL
1.
Turn crank (2) counterclockwise to remove tension on spring (3).
2.
Remove two nuts (1), screws (7), and shock absorber (5) from seat base (4) and top frame (6).
3.
Remove four nuts (8), lockwashers (9), screws (11), and two brackets (10) from seat base (4).
Discard lockwashers (9).
4.
Remove spring (3) from seat base (4) and top frame (6).
NOTE
Prior to removal, tag lower struts and upper struts for
installation.
5.
Remove four nuts (18), lockwashers (13), screws (17), and lower strut (19) from top frame (6) and
seat base (4). Discard lockwashers (13).
6.
Remove two top nuts (16), lockwashers (15), torque rod (14), spring (26), sleeve (27), and
spring (26) from top frame (6) and upper strut (23). Discard lockwashers (15).
7.
Remove two nuts (22), lockwashers (21), screws (20), and upper strut (23) from seat base (4).
Discard lockwashers (21).
8.
Remove pin (24) from crank (2). Discard pin (24).
9.
Remove crank (2) and washer (25) from swivel nut (12) and top frame (6).
1
9
2
8
10
7
11
6
3
4
7
5
1
4
0235 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |