 |
|||
|
|
|||
|
Page Title:
COMPANION SEAT MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0234 00
COMPANION SEAT MAINTENANCE (Contd)
COMPANION SEAT BACKREST REMOVAL
Remove backrest (1) from backrest frame (29).
COMPANION SEAT CUSHION REMOVAL
1. Remove screw (4) and locknut (17) from link (15) and cushion (18). Discard locknut (17).
2. Remove cotter pin (25), washers (27), pin (28), and cushion (18) from cushion frame (21). Discard
cotter pin (25).
COMPANION SEAT FASTENER REMOVAL
1. Unlatch fastener (7) from backrest frame (29).
2. Remove two locknuts (32), bolts (30), and fastener (7) from cab rail (31). Discard locknuts (32).
COMPANION SEAT REMOVAL
1. Unlatch fastener (7) from backrest frame (29).
2. Remove four screw-assembled washers (20) and cushion frame (21) from cab floor (13). Discard
screw-assembled washers (20).
FRAME DISASSEMBLY
1. Remove four cotter pins (3), washers (2), pins (6), and backrest frame (29) from link (5), link (26),
and cushion frame (21). Discard cotter pins (3).
2. Remove locknut (19), screw (24), two washers (22), sleeve (23), and link (26) from cushion
frame (21). Discard locknut (19).
3. Remove cotter pin (12), pin (16), and link (15) from cushion frame (21). Discard cotter pin (12).
4. Remove cotter pin (9), washer (8), and link (5) from cushion frame (21). Discard cotter pin (9).
5. Remove four locknuts (14), screws (10), and leg (11) from cushion frame (21). Discard locknuts (14).
FRAME ASSEMBLY
1. Install leg (11) on cushion frame (21) with four screws (10) and new locknuts (14).
2. Install link (5) on cushion frame (21) with washer (8) and new cotter pin (9).
3. Install link (15) on cushion frame (21) with pin (16) and new cotter pin (12).
4. Install link (26) on cushion frame (21) with screw (24), two washers (22), sleeve (23), and new
locknut (19).
5. Install link (5) and link (26) on backrest frame (29) with four pins (6), washers (2), and new cotter
pins (3).
COMPANION SEAT INSTALLATION
1. Install backrest (1) on frame (29).
2. Install cushion frame (21) on cab floor (13) with four screw-assembled washers (20).
3. Latch fastener (7) on backrest frame (29).
COMPANION SEAT CUSHION INSTALLATION
1.
Install cushion (18) on cushion frame (21) with pin (28), washer (27), and new cotter pin (25).
2.
Install link (15) on cushion (18) with screw (4) and new locknut (17).
0234 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version