 |
|||
|
|
|||
|
Page Title:
WINDSHIELD ARM, GLASS ASSEMBLY, AND HANDLE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0229 00
WINDSHIELD ARM, GLASS, AND HANDLE REPLACEMENT (Contd)
ARM REMOVAL
Remove two screws (7) and spring washers (8) from arm (9), outer frame bracket (4), lever (10), and
glass frame bracket (11).
GLASS ASSEMBLY REMOVAL
1.
Remove seven screw-assembled lockwashers (17) from windshield hinge (2) and windshield outer
frame (3). Discard screw-assembled lockwashers (17).
2.
Remove hinge seal (1) from windshield hinge (2).
3.
Remove seal (12) from windshield inner frame (18). Discard seals (1) and (12).
HANDLE REMOVAL
1.
Remove two screws (16), nuts (14), and handle (15) from windshield inner frame (18).
2.
Remove lockwasher (13) from handle (15). Discard lockwasher (13).
3.
Remove two screw-assembled lockwashers (5) and plate (6) from windshield outer frame (3).
Discard screw-assembled lockwashers (5).
HANDLE INSTALLATION
1.
Install new lockwasher (13) in handle (15).
2.
Install handle (15) on windshield inner frame (18) with two screws (16) and nuts (14).
3.
Install plate (6) on windshield outer frame (3) with two new screw-assembled lockwashers (5).
GLASS ASSEMBLY INSTALLATION
1.
Apply adhesive to mounting side of new hinge seal (1) and on hinge (2).
2.
Install new hinge seal (1) on hinge (2).
3.
Install new seal (12) on windshield inner frame (18).
4.
Install hinge (2) on windshield outer frame (3) with seven new screw-assembled lockwashers (17).
5.
Install windshield inner frame (18) on hinge (2).
ARM INSTALLATION
1.
Install arm (9) on outer frame bracket (4) and lever (10) on glass frame bracket (11) with two
screws (7) and spring washers (8).
2.
Install conlinks (WP 0241 00).
3.
Install wiper switch, motor, conlink covers (WP 0240 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0229 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version