 |
|||
|
|
|||
|
Page Title:
WINDSHIELD ASSEMBLY MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0228 00
WINDSHIELD ASSEMBLY MAINTENANCE (Contd)
WARNING
Windshield is heavy. An assistant is required during removal
and installation to prevent injury to personnel.
REMOVAL
NOTE
Perform steps 1 through 3 for vehicles equipped with hardtop kit.
1.
Remove two screws (12) and lockwashers (11) from cab hardtop (13) and windshield frame (5).
Discard lockwashers (11).
2.
Remove two screws (2), spacers (3), and locknuts (4) from cab hardtop (13) and windshield
frame (5). Discard locknuts (4).
3.
Loosen two knobs (22).
NOTE
Two lower hinges are attached to cab by six screw-assembled
lockwashers. Exhaust support is attached to lower right hinge
and cab by a longer screw and lockwasher.
Assistant will help with step 4.
4.
Remove six screw-assembled lockwashers (28) and windshield frame (5) from left (29) and
right (31) upper hinges and cab (32). Discard screw-assembled lockwashers (28).
5
Remove six screw-assembled lockwashers (26) and lower left hinge (25) from cab (32). Discard
screw assembled lockwashers (26).
6.
Remove six screw-assembled lockwashers (35) from lower right hinge (30) and cab (32). Discard
screw-assembled lockwashers (35).
7.
Remove screw (34), lockwasher (33), and lower right hinge (30) from exhaust support (36) and
cab (32). Discard lockwasher (33).
8.
Remove four screws (17) and two brackets (18) from windshield frame (5).
9.
Remove four screws (21), two plates (19), and weatherstrips (20) from two brackets (18). Discard
weatherstrips (20).
10.
Remove weatherstrip (1) from windshield frame (5). Discard weatherstrip (1). Clean windshield
frame (5) of all weatherstrip (1) remains.
11.
Remove snap fastener stud (7) and retainer nut (6) from windshield frame (5).
12.
Remove seal (10), four screws (9) and retainer (8) from windshield frame (5).
13.
Remove seal (14), two screws (15) and retainer (16) from windshield frame (5).
DISASSEMBLY
1.
Remove two knobs (22) and studs (23) from upper hinges (29).
2.
Remove two nuts (27), hinge bolts (24), and upper hinges (29) from lower hinges (25).
0228 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version