 |
|||
|
|
|||
|
Page Title:
CAB COWL VENT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0224 00
CAB COWL VENT REPLACEMENT (Contd)
REMOVAL
1. Remove nine screws (4) and cowl vent screen (5) from kick panel (1).
2.
Remove cotter pin (8), hinge pin (3), and cab cowl vent door (6) from bracket (2). Discard cotter
pin (8).
3.
Inspect cab cowl vent door seal (7). If damaged, clean cab cowling seal mounting surface (9) free of
seal (7) debris and replace seal (7).
INSTALLATION
NOTE
Perform steps 1 and 2 only if seal was removed.
1.
Apply adhesive to mounting side of seal (7) and cowling seal mounting surface (9).
2.
Install seal (7) on cab cowling seal mounting surface (9).
3.
Install cab cowl vent door (6) and hinge pin (3) on bracket (2) with new cotter pin (8).
4.
Install cab cowl vent screen (5) on kick panel (1) with nine screws (4).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
5
4
3
2
1
6
9
8
7
END OF WORK PACKAGE
0224 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version