 |
|||
|
|
|||
|
Page Title:
HEADLIGHT BRACKET AND RUBBER RADIATOR SHIELD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0219 00
HEADLIGHT BRACKET REPLACEMENT (Contd)
REMOVAL
1.
Remove two screws (5), washers (4), and brace (7) from front fender (1) and headlight bracket (11).
2.
Remove three nuts (17), washers (16) and (13), and screws (12) from headlight bracket (11).
3.
Remove two nuts (15), washers (14), and screws (6) from front hinge (2) and side panel (3).
4.
Remove two nuts (18), washers (19), screws (8), and headlight bracket (11) from front fender (1).
5.
Remove three rivets (9) and rubber radiator shield (10) from headlight bracket (11).
INSTALLATION
1.
Install rubber radiator shield (10) on headlight bracket (11) with three rivets (9).
2.
Install headlight bracket (11) on front fender (1) with two nuts (18), washers (19), and screws (8).
3.
Install front hinge (2) on side panel (3) with two nuts (15), washers (14), and screws (6).
4.
Install headlight bracket (11) on front fender (1) with three nuts (17), washers (16) and (13), and
screws (12).
5.
Install brace (7) on headlight bracket (11) and front fender (1) with two washers (4) and screws (5).
6.
Install blackout drive lamp and housing (WP 0123 00).
7.
Install sealed beam and headlight housing (WP 0120 00).
8.
Install brush guard (WP 0203 00).
9.
Connect battery ground cable (WP 0126 00).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0219 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version