 |
|||
|
|
|||
|
Page Title:
CAB DOOR WINDOW REGULATOR AND HANDLE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0213 00
CAB DOOR WINDOW REGULATOR AND HANDLE REPLACEMENT (Contd)
WINDOW REGULATOR HANDLE REMOVAL
Remove screw (6), window regulator handle (5), and washer (4) from cab door window regulator (7).
CAB DOOR WINDOW REGULATOR REMOVAL
NOTE
Cab door window regulator must be supported as last screw is
removed.
1.
Remove four screws (3) from inner door panel (2) and cab door window regulator (7).
2.
Slide regulator arm stud (8) out of stationary track (9) and remove cab door window regulator (7)
through cab door (1) inspection hole.
CAB DOOR WINDOW REGULATOR INSTALLATION
1.
Install window regulator (7) through cab door (1) inspection hole and slide regulator arm stud (8)
into stationary track (9).
NOTE
Regulator arm stud must be held in stationary track when
installing window regulator to inner door panel.
2.
Install window regulator (7) on inner door panel (2) with four screws (3).
WINDOW REGULATOR HANDLE INSTALLATION
1.
Install washer (4) and window regulator handle (5) on window regulator (7) with screw (6).
2.
Install cab door glass (WP 0210 00).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0213 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version