 |
|||
|
|
|||
|
Page Title:
CAB DOOR AND HINGES REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0209 00
CAB DOOR AND HINGES REPLACEMENT (Contd)
WARNING
Cab door is heavy. An assistant is required during removal and
installation to prevent injury to personnel.
CAB DOOR REMOVAL
NOTE
Assistant will help with steps 1 and 2.
1.
Remove two locknuts (6), washers (7), and hinge screws (1) from three mirror braces (2) and two
cab door hinges (4). Discard locknuts (6).
2.
Remove cab door (5) from hinges (9) mounted on cab (8) A-pillar (10).
CAB DOOR HINGES REMOVAL
Remove sixteen screws (3) and cab door hinges (4) and (9) from cab door (5) and cab (8) A-pillar (10).
CAB DOOR HINGES INSTALLATION
Install two cab door hinges (4) on cab door (5) and two hinges (9) on cab (8) A-pillar (10) with sixteen
screws (3).
CAB DOOR INSTALLATION
NOTE
Assistant will help with steps 1 and 2.
1.
Lift cab door (5) and position cab door hinges (4) to hinges (9) mounted on cab (8) A-pillar (10) and
align three mirror braces (2) to hinges (4) and (9).
2.
Install two hinge screws (1) through three mirror braces (2) and hinges (4) and (9).
3.
Install two washers (7) and two new locknuts (6) on hinge screws (1). Tighten locknuts (6).
4.
Install cab door weatherseal (WP 0217 00).
5.
Install cab door check rod (WP 0215 00).
6.
Install cab door window regulator (WP 0213 00).
7.
Install cab door dovetail wedge (WP 0208 00).
8.
Install cab door lock (WP 0214 00).
9.
Install side panel (WP 0218 00).
10.
Connect battery ground cable (WP 0126 00).
11.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0209 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version