 |
|||
|
|
|||
|
Page Title:
SPARE TIRE CARRIER MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0202 00
SPARE TIRE CARRIER MAINTENANCE (Contd)
REMOVAL
Remove four locknuts (3), screws (1), and spare tire carrier (2) from frame (4). Discard locknuts (3).
DISASSEMBLY
1.
Remove four nuts (10), lockwashers (11), two U-bolts (13), and ends of cable (7) from pickup
member (14). Discard lockwashers (11).
WARNING
Wear leather gloves when handling cable. Do not let cable run
through hands. Broken or rusty wires can cause injury to
personnel.
2.
Remove cable (7) from shaft (8).
3.
Remove cotter pin (5) from shaft (8) and remove shaft (8) from housing (6). Discard cotter pin (5).
INSPECTION
1.
Inspect housing (6) for cracks, breaks, and broken welds. Replace housing (6) if cracked, bent, or
welds are broken.
2.
Inspect pickup member (14) for cracks, breaks, and loose studs (12). Replace pickup member (14) if
cracked, broken, or studs (12) are loose.
3.
Inspect shaft (8) and ratchet (9) for cracks, breaks, bends, and broken teeth. Replace shaft (8) or
ratchet (9) if cracked, broken, bent, or teeth are broken.
4.
Inspect cable (7) for breaks and frays. Replace cable (7) if broken or frayed.
ASSEMBLY
1.
Install shaft (8) and ratchet (9) in housing (6) with new cotter pin (5).
2.
Install ends of cable (7) through holes in shaft (8), and feed ends of cable (7) through hole in
bottom of housing (6).
NOTE
Ensure cable ends are of equal length through shaft.
3.
Install two U-bolts (13) on pickup member (14) with four new lockwashers (11) and nuts (10). Do
not tighten nuts (10).
NOTE
Ensure cable ends extend through both U-bolts before
tightening nuts in step 4.
4.
Install ends of cable (7) through holes in pickup member (14) and U-bolts (13). Tighten nuts (10).
INSTALLATION
1.
Install spare tire carrier (2) on frame (4) with four screws (1) and new locknuts (3). Tighten
locknuts (3) 3035 lb-ft (4147 Nm).
2.
Install spare tire (TM 9-2320-361-10).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0202 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version