|
|
TM 9-2320-361-24-2
0199 00
PINTLE HOOK MAINTENANCE (Contd)
PINTLE HOOK LATCH INSTALLATION (Contd)
4.
If removed, install drivescrew (15) and chain (17) on pintle hook (14) with new cotter pin (16).
5.
Install lock (11) on pintle hook (14) with screw (6), slotted nut (9), and new cotter pin (10). Ensure
lock (11) and latch (7) move freely.
6.
Install two grease fittings (13) and (5) in drive pin (12) and screw (6).
PINTLE HOOK INSTALLATION
1.
Install inner bracket (3) and outer bracket (19) on rear crossmember (4) with two screws (18) and
new locknuts (20).
2.
Install pintle hook (14) on crossmember (4) with washer (2), and slotted nut (1). Tighten slotted
nut (1) to obtain 0.0030.017 in. (0.0760.432 mm) clearance between washer (2) and bracket (3).
3.
Install new cotter pin (21).
4.
Lubricate pintle hook (WP 0020 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
7
1
2
3
6
8
4
5
9
21
16
10
20
11
19
18
17
12
13
14
15
END OF WORK PACKAGE
0199 00-3/4 blank
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |