 |
|||
|
|
|||
|
Page Title:
SERVICE BRAKE BLEEDING - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0172 00
SERVICE BRAKE BLEEDING (Contd)
PRESSURE TANK METHOD (Contd)
17.
If all wheel cylinders (14) need to be bled, start with wheel cylinder farthest from air-hydraulic
cylinder (18) and progressively go in distance sequence to wheel cylinder (18) nearest to air
hydraulic cylinder (18). Tighten wheel cylinder bleeder screws (15) 1015 lb-ft (1420 Nm).
18.
When finished bleeding hydraulic system, turn valve (13) off and disconnect female quick
disconnect coupling (12) on tank hose (11) from male quick-disconnect coupling (8) and adapter
plug (9).
19.
Remove adapter plug (9) with male quick-disconnect coupling (8) and install filler plug (5) and
adapter (4) in master cylinder (6). Tighten filler plug (5) 1520 lb-ft (227 Nm).
20.
Connect vent line (3) to adapter (4).
21.
Remove bleeder tank (10) from cab. Follow equipment manufacturer instructions for placing
bleeder tank (10) in storage.
22.
Close access door (1) and install new screw-assembled lockwasher (7).
4
10
2
8
9
1
3
5
11
13
6
6
7
~
12
6
4
5
15
14
19
16
16
18
17
17
0172 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version