|
|
TM 9-2320-361-24-1
0164 00
PARKING BRAKESHOE MAINTENANCE (Contd)
ASSEMBLY
NOTE
Perform step 1 only if lubrication fittings were removed.
1.
Install three lubrication fittings (1) into outer brakeshoe (2) and one lubrication fitting (1) and
new pin (7) into inner brakeshoe (6).
2.
Coat pin (5) with light film of GAA grease and install inner brakeshoe (6) on pin (5) with new
clip (8).
3.
Coat pin (3) with light film of GAA grease and install outer brakeshoe (2) on pin (3) with new
clip (11).
4.
Coat cam pin (10) with light film of GAA grease and install cam pin (10) in outer brakeshoe (2)
with new lockwasher (12) and nut (13).
5.
Install two washers (18) and (17) and spring (16) on pins (3) and (5) with two new clips (15).
Position V of spring (16) towards lever (4). Turn cam pin (10) for maximum opening between
brakeshoes (2) and (6).
0164 00-6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |