 |
|||
|
|
|||
|
Page Title:
FRONT SPRING BUMPER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0155 00
FRONT SPRING BUMPER REPLACEMENT (Contd)
REMOVAL
NOTE
Left and right spring bumpers and seats are replaced the same
way. This procedure covers the right side.
1.
Remove four nuts (7), lockwashers (6), two U-bolts (1), bumper (3), and saddle (2) from spring (4)
and plate (5). Discard lockwashers (6).
2.
Remove saddle (2) from bumper (3).
INSTALLATION
1.
Apply sealant around top mating surface of metal base of bumper (3) and saddle (2).
2.
Install bumper (3) in saddle (2) and set saddle (2) over center bolt (8) on spring (4).
3.
Install two U-bolts (1) over saddle (2) and plate (5) with four new lockwashers (6) and nuts (7).
Tighten nuts (7) 190230 lb-ft (258312 Nm).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
1
3
4
8
5
6
7
END OF WORK PACKAGE
0155 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version