 |
|||
|
|
|||
|
Page Title:
UNIVERSAL JOINT MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0141 00
UNIVERSAL JOINT MAINTENANCE (Contd)
CLEANING AND INSPECTION
WARNING
Skysol 100 solvent is combustible; DO NOT use or store near
heat, sparks, flame, or other ignition sources. Use mechanical
ventilation whenever product is used in a confined space,
heated above ambient temperatures, or agitated. Keep
container sealed when not in use.
Contact with Skysol 100 may cause skin irritation. Use
chemical-resistant gloves. In case of skin contact, remove any
contaminated clothing and wash skin thoroughly with soap and
water. Wash contaminated clothing before reuse. Eye contact
may cause irritation, tearing, or blurring of vision. Use face
shield or goggles when eye contact may occur. In case of eye
contact, flush eyes with large amounts of water for at least 15
minutes or until irritation subsides. Inhalation may cause
irritation to upper respiratory passages. DO NOT have food or
drink in the vicinity. Failure to comply may result in injury to
personnel.
1.
Clean all parts with Skysol 100 and dry with clean rag.
2.
Inspect yokes (2) for breaks, cracks, and bends. Replace yokes (2) if damaged.
3.
Inspect retaining ring grooves (1) for damage. Replace yoke flange (7) or yoke (2) if retaining ring
grooves (1) are damaged.
4.
Inspect shaft (3) for bends, cracks, and damaged threads (5) or splines (4). Replace shaft (3) if
damaged, bent or cracked.
5.
Inspect bearings (6) in bearing cap (2) (TM 9-214). Replace U-joint if damaged.
1
1
2
3
4
5
1
6
7
0141 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version