 |
|||
|
|
|||
|
Page Title:
INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0140 00
INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) (Contd)
REMOVAL
1.
Remove cotter pin (8), nut (9), washer (10), flange (11), and deflector (12) from shaft (23). Discard
cotter pin (8).
NOTE
Assistant will help with step 2.
2.
Remove two locknuts (16), washers (15), screws (7), propeller shaft (23), and bearing housing (18)
from frame support (4). Discard locknuts (16).
NOTE
Mark yoke position for installation.
3.
Remove four locknuts (25) and flange yoke (24) from flange (26) and studs (1) located in parking
brake drum (2). Discard locknuts (25).
4.
Remove four locknuts (3), screws (5), and frame support (4) from crossmember (6). Discard
locknuts (3).
DISASSEMBLY
1.
Remove bearing housing (18) from propeller shaft (23).
2.
Remove screw (22), lockwasher (21), and side shield (20) from propeller shaft (23). Discard
lockwasher (21).
3.
Remove two seals (13) and bearing (19) from bearing housing (18). Discard seals (13).
4.
Remove four rubber insulators (14) from bearing housing (18).
NOTE
Perform step 5 if lubrication fitting is damaged.
5.
Remove lubrication fitting (17) from bearing housing (18).
0140 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version