|
|
TM 9-2320-361-24-1
0135 00
FRONT WHEEL DRIVE LOCK-IN SWITCH MAINTENANCE (Contd)
AIR VALVE AND BRACKET INSTALLATION
1.
Install bracket (8) on dash panel (2) with two screws (11) and new locknuts (6).
NOTE
All male connections must be wrapped with antiseize tape
before installation.
2.
Install elbow (7) and adapter (13) on air valve (12).
3.
Install hose (1) on adapter (13) and pipe tee (3).
4.
Install new sleeve (5) and line (4) on elbow (7).
5.
Install air valve (12) and decal plate (9) on bracket (8) with two screws (10).
6.
Install front-wheel drive lock-in indicator and air pressure switch (WP 0118 00).
7.
Connect battery ground cable (WP 0126 00).
8.
Start engine and allow air reservoirs to fill (TM 9-2320-361-10). Check for air leaks.
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0135 00-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |