 |
|||
|
|
|||
|
Page Title:
BATTERY AND BATTERY BOX REPLACEMENT AND SERVICING - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0127 00
BATTERY AND BATTERY BOX REPLACEMENT AND SERVICING (Contd)
BATTERY BOX SUPPORT INSTALLATION
NOTE
Ensure clamps move freely when nuts are installed.
1.
Install two clamps (12) on battery box support (7) with two new spring washers (13), screws (14),
and new locknuts (11). Tighten locknuts (11) so that clamps (12) can move freely.
2.
Install battery box support (7) on two running board brackets (15) with four screws (17) and new
locknuts (16).
BATTERIES AND BATTERY BOX INSTALLATION
1.
Install shield (19) on battery box (6) with five screws (18) and new locknuts (20).
2.
Install two washers (9) and thumbscrews (10) on battery box (6) with two nuts (8).
3.
Install battery box (6) on battery box support (7).
NOTE
Assistant will help with step 4.
4.
Place two batteries (5) in battery box (6). Install battery holddown (3) on battery box (6) and
batteries (5) with four J-bolts (4), new lockwashers (2), and nuts (1).
5.
Install battery clamps (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
5
8
3
2
6
9
1
20
10
19
4
11
12
18
5
7
13
17
~
~
15
6
14
7
15
16
END OF WORK PACKAGE
0127 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version