|
|
TM 9-2320-361-24-1
0125 00
REAR COMPOSITE LAMPS AND HOUSING REPLACEMENT (Contd)
REAR COMPOSITE LAMPS REMOVAL
1.
Loosen six screws (8) and remove lens (9) and O-ring (7) from composite lamp housing (5). Discard
O-ring (7).
2.
Remove lamp(s) (6) from composite lamp housing (5).
REAR COMPOSITE LAMPS HOUSING REMOVAL
NOTE
Prior to removal, tag all lead wires for installation.
1.
Disconnect four wires (10) from wires (4).
2.
Remove two screws (1), lockwashers (2), and composite lamp housing (5) from bracket (3). Discard
lockwashers (2).
REAR COMPOSITE LAMPS HOUSING INSTALLATION
1.
Install composite lamp housing (5) on bracket (3) with two new lockwashers (2) and screws (1).
2.
Connect four wires (10) to wires (4).
REAR COMPOSITE LAMPS INSTALLATION
1.
Install lamp(s) (6) in composite lamp housing (5).
2.
Install new O-ring (7) and lens (9) on composite lamp housing (5) with six screws (8).
3.
Connect battery ground cable (WP 0126 00).
4.
Check operation of rear composite lamps (TM 9-2320-361-10).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0125 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |